|
|
M2C2RHAK |
Mach2.2 RHA Kit |
Mach2.2 Ride Height Adjuster Kit with Delrin barrel (Metal barrel discontinued), low friction ball joint, micro pulleys, ropes and short slider. For pre-June 2015 boats only. |
|
|
M2CRHAB |
RHA - Hales Single Micro Block |
Hales Single Micro Block with SS Ball Race |
|
|
M2C2BJS |
Mach2.2 Ride Height Adj Socket |
Mach2.2 Ride Height Adjuster Socket |
|
|
M2C2WAH |
Mach2.3 Adjustable Wand Holder |
|
|
|
M2C2BMC |
Mach2.2 Bow Mechanism |
Mach2.2 Bow Mechanism including: 2.2 Wand Adjuster Screw with control line sheave with 2.2 Brass Bearing & 2.2 Adjuster Nut, 2.2 Wand Axle with bottom guide, 2.2 Retaining Plate with rope guides, 2.1 Base Plate, 2.1 SS Bearings (Uprights) |
|
|
M2F3FFPR |
Mach2.3 Front Foil Push Rod L |
For the longer 2.3 front vertical, made from high tensile SS specially made for us. Approx 131cm x 2mm (M2 thread) |
|
|
M2F3RVC |
Mach2.3 Rudder Vertical Foil with Cover |
Mach2.3 Rudder Vertical. Seconds only available. Discount on application. |
|
|
M2R3SFLE |
Mach2.3 to 2.6 Forestay with Eye |
Mach2.3 to 2.6 SS 1x19 Wire Forestay with Eye, Length 4060mm, Used on the top hound |
|
|
M2W3OBLSC |
Mach2.3 Outer Wing Bar - Left Second |
Flatter top section for extra leverage. M2 tramps still fit. |
|
|
M2W3OBRSC |
Mach2.3 Outer Wing Bar - Right Second |
Flatter top section for extra leverage. M2 tramps still fit. |
|
|
M2FRHS2C |
Mach2.3 Rear Anhedral Foil - Small with Cover |
Mach2.3 Rear Small Anhedral Hydrofoil. Significantly thinner than the medium. |
|
|
M2FRH |
M2 Rudder Hydrofoil - Large |
Mach2 Rudder Hydrofoil Large |
|
|
M2FFHS |
M2 Front Hydrofoil - Small |
Still the best all-round foil. |
|
|
M2FFHC |
Mach2.0 Front Hydrofoil - Large with Cover |
The original Mach2 front foil - Nathan used it to win the 2014 worlds. Limited availability |
|
|
M2FFHSCC |
M2.0 Front Hydrofoil Second |
* The original Mach2 front foil - Nathan used it to win the 2014 worlds. Limited availability |
|
|
M2FFV |
M2.0 Front Vertical Foil Second |
Mach2.0 Front Vertical with fittings (except no Bellcrank) (length 1321mm) |
|
|
M2FFVC |
Mach2.0 Front Vertical Foil with Cover |
Mach2.0 Front Vertical with fittings (except no Bellcrank) (length 1321mm) |
|
|
M2FRV |
M2.0 Rudder Vertical |
(length 1320mm) |
|
|
M2FRVC |
Mach2.0 Rudder Vertical with Cover |
(length 1320mm) |
|
|
M2FFPR |
Mach2 Front Foil Push Rod Std |
For the std front vertical foil, made from high tensile SS specially made for us in the USA. Approx 128cm x 2mm (M2 thread) |
|
|
M2FFRTC |
Mach2 Control Rod Top Terminat |
Mach2 Front Foil control rod top terminator |
|
|
M2FFBCC |
Mach2 Bell Crank Connector |
|
|
|
M2FFBC |
Mach2 Bell Crank |
|
|
|
M2FFBCA |
Mach2 Bell Crank Axle |
|
