|
|
M2C1WSMP |
Mach2.1 Wand Axle Base Plate |
Mach2.1 (&2.2) Wand Axle Base Plate |
|
|
M2C2WAX |
Mach2.2 Wand Axle |
Includes Mach2 Gearing Adjuster Bearing |
|
|
M2C2WASB |
Mach2.2 Gearing Adj Screw Bearing |
Mach2.2 Gearing Adjuster Screw Bearing |
|
|
M2C2WAS |
Mach2.2 Gearing Adjuster Screw |
|
|
|
M2C2GARC |
Mach2.2 Gearing Adj Ret Clip |
Mach2.2 Gearing Adjuster Retaining Clip with Rope Leads |
|
|
M2R5SS |
Mach2.5 Regular Side Stay |
Mach2.5 SS 1x19 Wire Side Stay , Length 3340 +- 3mm |
|
|
M2S40DWC |
Mach2.40b Dacron Wing Tramp Set |
Mach2.40b Dacron Wing Tramp set. Designed for central cleats or cleats on front wing bar. |
|
|
M2S40HWC |
Mach2.40b HydraNet Wing Tramp Set |
Mach2.40b HydraNet Wing Tramp Set. Designed for central cleats or cleats at stay on front wing bar (not outer wing bar) |
|
|
M2S42DWC |
Mach2.42 Dacron Wing Tramp Set |
Mach2.42 Dacron Low Drag Wing Tramps, designed for cleats on the outer wing bar (not front wing bar). |
|
|
M2S42HWC |
Mach2.42 HydraNet Wing Tramp Set |
Mach2.42 HydraNet Low Drag Wing Tramps, designed for cleats on the outer wing bar (not front wing bar). |
|
|
M2S4WCB |
Mach 2.4 - 2.6 Wing Cover Bladder Set |
Mach2 Wing Cover Bladder Set for Mach 2.4 to 2.6 Tramps |
|
|
M2TEG |
Mach2 Tiller Extension with Grip |
Carbon Battlestick Tapered x 1380mm, ID 18mm, No UniJnt |
|
|
M2C3LP8 |
Mach2 Control Link Pin 3x8mm |
Special build for Mach2 Wand Adjuster Nut. 3mm diam 8.5 mm shank (comes with 2 cir clips) |
|
|
M2C1WAX |
Mach2.1 Wand Axle |
Improved connection to wand holder, matches new bearings |
|
|
M2C1WAN |
Mach2.1 Wand Adjuster Nut |
Can be adjusted to much lower gearing than 2.0 |
|
|
M2CWACR |
Mach2 Wand Adjust Connector |
Mach2 Wand Adjustable Connector (Connects front gearing to cable slider) |
|
|
M2CCS |
Mach2 Cable Slider Long |
Mach2 Control Cable Slider Long |
|
|
M2CCSS |
Mach2 Cable Slider Short |
Mach2 Control Cable Slider Short |
|
|
M2C3LP6 |
Mach2 Control Link Pin 3x6mm |
Special build for Mach2 Control Cable Sliders. 3mm diam 6.5 mm shank (comes with 2 cir clips) |
|
|
M2C3HPR |
Mach2.3 Hull Push Rod |
2.5mm x 97.5cm |
|
|
M2CHPR |
Mach2 Hull Push Rod |
117cm |
|
|
M2C3RHAB |
Mach2.3 Ride Height Adj Barrel assembly |
Mach2.3 Ride Height Adjuster Barrel Assembly, Fits new (or modified pre2.3) boat with shortened control rod tunnel. Eliminates risk of rope riding off end of barrel. |
|
|
M2C3RHAFC |
Mach2.3 RHA Front Connector |
|
|
|
M2C3RHAFCI |
Mach2.3 RHA Front Connector Insert |
Mach2.3 RHA Front Connector Insert |
